On the impact of variable in wireless power transfer

A. Smith *, K. Wilson

Department of Electrical and Electronic Engineering, Melbourne School of Engineering, Parkville, Victoria, 3031, Australia

Abstract

Wireless power transmission is the way to transfer power without using wire. Wireless power transmission helps to connect those areas where people are unable to get a suitable power source. The implementation of this system is to make life better and reduce the usage of wire or cable. The issues for certain applications are needed to put very near between the transmitter and the receiver. The superimposed technique is studied to solve a part of WPT technology. Using DC voltage in series with AC voltage in the coil can increase the voltage in AC type. 100Watt of power transmission had been designed to transmit electrical energy. The method was used to analyze the coil based on two sizes which are 16cm and 160cm of the diameter of the coil. Both experiments were tested in an open area without barriers. The purposed of design to identify the performance of coil transmission based on distance in the WPT system to turn on the 5V of LED. To get longer distance, the superimposed technique had been studying in order to get higher voltage at the transmission coil. The superimposed technique shows the increment of distance up to 2 times compared to the system without the superimposed technique.

Keywords

Resonant frequency, Coil, Power transmission, Distance, Superimposed technique

Digital Object Identifier (DOI)

https://doi.org/10.21833/AEEE.2019.08.001

Article history

Received 26 February 2019, Received in revised form 20 June 2019, Accepted 25 June 2019

Full text

DownloadAvailable in PDF
Portable Document Format

How to cite

Smith A and Wilson K (2019). On the impact of variable in wireless power transfer. Annals of Electrical and Electronic Engineering, 2(8): 1-5

References (24)

  1. Agbinya JI (2015). Wireless power transfer. River Publishers, Aalborg, Denmark.   [Google Scholar]
  2. Akiyama T, Ozaki M, Tsujimoto T, Tanabe M, Kudo H, Abe H, and Yabuta A (2015). Control method of wireless power transfer system for allowing coil position deviation. In the IEEE International Telecommunications Energy Conference, IEEE, Osaka, Japan: 1-3. https://doi.org/10.1109/INTLEC.2015.7572501   [Google Scholar]
  3. Bradley AM, Feezor MD, Singh H, and Sorrell FY (2001). Power systems for autonomous underwater vehicles. IEEE Journal of Oceanic Engineering, 26(4): 526-538. https://doi.org/10.1109/48.972089   [Google Scholar]
  4. Chabalko M, Besnoff J, Laifenfeld M, and Ricketts D (2017). Resonantly-coupled wireless power transfer for non-stationary loads with application in automotive environments. IEEE Transactions on Industrial Electronics, 64(1): 91-103. https://doi.org/10.1109/TIE.2016.2609379   [Google Scholar]
  5. Coifman R, Rokhlin V, and Wandzura S (1993). The fast multipole method for the wave equation: A pedestrian prescription. IEEE Antennas and Propagation Magazine, 35(3): 7-12. https://doi.org/10.1109/74.250128   [Google Scholar]
  6. Dahalan WM, Othman AG, Zoolfakar AG, Khalid MR, and Rizman PZM (2016). Optimum DNR and DG sizing for power loss reduction using improved meta-heuristic methods. ARPN Journal of Engineering and Applied Sciences, 11(20): 11925-11929.   [Google Scholar]
  7. Dai J and Ludois DC (2015). Single active switch power electronics for kilowatt scale capacitive power transfer. IEEE Journal of Emerging and Selected Topics in Power Electronics, 3(1): 315-323. https://doi.org/10.1109/JESTPE.2014.2334621   [Google Scholar]
  8. Jang HS, Yu JW, and Lee WS (2016). 1-port measurement method of the coupling factor and receiver. IEEE Transactions on Antennas and Propagation, 64(9): 4098-4102. https://doi.org/10.1109/TAP.2016.2583480   [Google Scholar]
  9. Johnson RC (1993). Antenna engineering handbook. Third Edition, McGraw-Hill, New York, USA.   [Google Scholar]
  10. Klontz KW, Divan DM, Novotny DW, and Lorenz RD (1994). Submersible contactless power delivery system (U.S. Patent No. 5,301,096). U.S. Patent and Trademark Office, Washington, USA.   [Google Scholar]
  11. Lee CK, Zhong WX, and Hui SYR (2012). Effects of magnetic coupling of nonadjacent resonators on wireless power domino-resonator systems. IEEE Transactions on Power Electronics, 27(4): 1905-1916. https://doi.org/10.1109/TPEL.2011.2169460   [Google Scholar]
  12. Lee SH, Lee BS, and Lee JH (2016). A new design methodology for a 300-kW, low flux density, large air gap, online wireless power transfer system. IEEE Transactions on Industry Applications, 52(5): 4234-4242. https://doi.org/10.1109/TIA.2016.2583407   [Google Scholar]
  13. Li S, Li W, Deng J, Nguyen TD, and Mi CC (2015). A double-sided LCC compensation network and its tuning method for wireless power transfer. IEEE Transactions on Vehicular Technology, 64(6): 2261-2273. https://doi.org/10.1109/TVT.2014.2347006   [Google Scholar]
  14. Liu C, Hu AP, Covic GA, and Nair NKC (2012). Comparative study of CCPT systems with two different inductor tuning positions. IEEE Transactions on Power Electronics, 27(1): 294-306. https://doi.org/10.1109/TPEL.2011.2158322   [Google Scholar]
  15. Ludois DC, Erickson MJ, and Reed JK (2014). Aerodynamic fluid bearings for translational and rotating capacitors in noncontact capacitive power transfer systems. IEEE Transactions on Industry Applications, 50(2): 1025-1033. https://doi.org/10.1109/TIA.2013.2273484   [Google Scholar]
  16. Mohd RAG, Nadiyatul AAL, and Zairi IR (2015). Three phase induction motor inverter application for motion control using crusher machine. ARPN Journal of Engineering and Applied Sciences, 10(20): 9549-9552.   [Google Scholar]
  17. Mur-Miranda JO, Fanti G, Feng Y, Omanakuttan K, Ongie R, Setjoadi A, and Sharpe N (2010). Wireless power transfer using weakly coupled magnetostatic resonators. In the IEEE Energy Conversion Congress and Exposition, IEEE, Atlanta, USA: 4179-4186. https://doi.org/10.1109/ECCE.2010.5617728   [Google Scholar]
  18. Samanta S and Rathore AK (2015). A new current-fed CLC transmitter and LC receiver topology for inductive wireless power transfer application: Analysis, design, and experimental results. IEEE Transactions on Transportation Electrification, 1(4): 357-368. https://doi.org/10.1109/TTE.2015.2480536   [Google Scholar]
  19. Shvets AV, Nickolaenko P, and Chebrov VN (2016). Effect of solar flares on Schumann resonance frequencies. In the 9th International Kharkiv Conference on Physics and Engineering of Microwaves, Millimeter and Submillimeter Waves, IEEE, Kharkiv, Ukraine: 1-4. https://doi.org/10.1109/MSMW.2016.7538029   [Google Scholar]
  20. Singh H, Bellingham JG, Hover F, Lemer S, Moran BA, Von der Heydt K, and Yoerger D (2001). Docking for an autonomous ocean sampling network. IEEE Journal of Oceanic Engineering, 26(4): 498-514. https://doi.org/10.1109/48.972084   [Google Scholar]
  21. Tesla N (1900). Apparatus for transmission of electrical energy (U.S. Patent No. 649,621). U.S. Patent and Trademark Office, Washington, USA.   [Google Scholar]
  22. Tong CY, Meledin DV, Marrone DP, Paine SN, Gibson H, and Blundell R (2003). Near field vector beam measurements at 1 THz. IEEE Microwave and Wireless Components Letters, 13(6): 235-237. https://doi.org/10.1109/LMWC.2003.814602   [Google Scholar]
  23. Zambari IF, Hui CY, and Mohamed R (2013). Development of wireless energy transfer module for solar energy harvesting. Procedia Technology, 11: 882-894. https://doi.org/10.1016/j.protcy.2013.12.272   [Google Scholar]
  24. Zhang Y, He F, Liu F, Chen K, Zhao Z, and Yuan L (2016). Comparison of two bidirectional wireless power transfer control methods. In the Asia-Pacific International Conference on Electromagnetic Compatibility, IEEE, Shenzhen, China, 1: 68-70. https://doi.org/10.1109/APEMC.2016.7522832   [Google Scholar]